Lukas P 600 OE - Manual (Page 30)

30
Fault Check Cause Solution
Connected rescue
device does not
reach its specifi c
performance data Maximum permitted
operating pressure of
the pump is not reached Have repaired by
authorised service
facility, authorised
dealer or directly by
LUKAS
Connected unit
defective Rectifi cation see
operating instructions of
the connected unit
During function test:
A pressure gauge
installed between the
rescue equipment
and the hydraulic
power pack does
not indicate the
maximum operating
pressure of the
equipment. Check the details
of the rescue
device The operating pressure
of the connected
rescue device is locked
internally No repair or fault
rectifi cation required
Connected rescue
device is defective Rectifi cation see
operating instructions of
the connected unit
Hydraulic unit defective Have repaired by
authorised service
facility, authorised
dealer or directly by
LUKAS
Maximum pressure
not achieved Mono-coupling on
connection hose is
defective Replace connection
hose
Hydraulic unit defective Have repaired by
authorised service
facility, authorised
dealer or directly by
LUKAS