Lukas P 600 OE - Manual (Page 16)

16
NOTE:
Do not fi ll up to the maximum mark because otherwise hydraulic fl uid
could come out of the fi ller cap when running.
b) Open the fi ller cap on the fl uid tank.
The fi ller cover can also be removed completely to make fi lling easier. To do this
open the fi ller cover by approx. 35° and pull the cover off towards the coupling.
Do not use force since this could damage the cover.
1. 2.
c) Fill with hydraulic fl uid up to the maximum mark.
You should use a funnel for fi lling to prevent spilling the hydraulic fl uid.
d) Close the tank again with the fi ller cap and remove any spilled hydraulic fl uid with
a suitable cloth.
e) Replace the fi ller cover (if removed) and close completely. It clicks into place when
closed.