Lukas Concrete crushers - Manual (Page 6)

6
In the event of malfunctions,
immediately deactivate the
device and secure it. The
malfunction must be repaired
immediately.
Do not carry out any changes
(additions or conversions) to
the device without obtaining
the prior approval of LUKAS.
Observe all safety and danger
notes on the equipment and
in the operating instructions.
All safety instructions and
hazard warnings on the
device must be kept intact
and in a legible condition.
Any method of operation
which impairs safety and/or
stability of the equipment is
prohibited!
Comply with all specified
dates or dates specified in
the operating instructions
pertaining to regular checks /
inspections of the equipment.
Safety devices must never be
deactivated!
The maximum permitted
operating pressure noted on
the equipment must not be
exceeded.
Before the equipment is
switched on/started up, and
during its operation, it must
be ensured that nobody is
endangered by the operation
of the equipment.
Only original LUKAS
accessories and spare parts
may be used for repairs.
Make sure that you do not
get caught in the hose loops
and trip when working with or
transporting the device.
When working close to live
components and cables,
suitable measures must
be taken to avoid current
transfers or high-voltage
transfers to the equipment.
Please note that, when
crushing or cutting, tearing
or breaking can cause
falling material, or sudden
removal of such can cause
it to suddenly catapult off:
necessary precautions must
be taken.
Prevent electrostatic
discharge, which has the
possible consequence of
spark generation, when
handling the device.
Only touch any broken-off
parts or the cut-off parts while
wearing protective gloves,
since the torn / cut edges can
be very sharp.