Lukas SC 350 E - Manual (Page 30)

30
ATTENTION!
If you have not maintained the smoothness or incline, the proper operation of the
blade is no longer guaranteed and the blades must be replaced.
In addition, when grinding, you must make sure that the inclination of the cutting surface
in the direction of the blade arm movement is not changed. Check the incline and
smoothness of the ground surface, using a suitable measuring tool.
Slide surface plane
Procedure:
1. Clamp the blade securely into the clamping device so that it cannot move, but with the
grinding area exposed.
2. Carefully grind the burr away evenly until you reach the sliding surface level.
(see illustration)
9.3.4 Spreader arm, spreader tips, protective cover and handle exchange for
the spreader
Components to be
replaced Required work
steps
Handle 1., 2. and 8.
Plug-on tips 1., 5. and 8.
Protective cover 1. - 4. and 8.
Lever links 1. - 4., 6. and 8.
Spreader arms 1. - 6. and 8.