Carriages, Quick attach, Attachment removal – Lull 644E-42 Operation Manual User Manual

Page 68: Exit the vehicle using both hand holds, Operation

Model 644E

Origin 3/04

Operation

Quick Attach

This vehicle is equipped with a quick attach system for easy attachment changing.

Attachment Removal

Be sure you are performing this procedure on level ground.

1. Come to a complete stop, place the travel select lever in the (N) NEUTRAL

DETENT position and engage the parking brake switch.

2. Extend the boom approximately 10 feet (3 meters) and tilt the carriage

backward.

3. Exit the vehicle using both hand holds.

4. Raise the quick attach pin lock lever (1) and pull out the pin (2) at the bot-

tom of the quick attach link (3).

5. Return to the operators compartment, fasten the seat belt and lower the

attachment to the ground in a level position. Tilt the attachment forward.
This will rotate the quick attach link back away from the attachment.

6. Lower and then retract the boom until the ends of the attachment pivot pin

has disconnected from the attachment.

Carriages

OS03312