Lull 644E-42 Operation Manual - Manual (Page 122)

120 Model 644E Origin 3/04
General Maintenance
C. Replace In-line Fuel Strainer
(250 Hour Intervals)
1. Unlatch and open the engine cover.
2. The fuel strainer (1) is located down line from the engines lift pump (2).
Loosen the two hose clamps (3) that secure the strainer in place.
3. Remove the old strainer and dispose of properly.
4. Install the new strainer with arrow (4) pointing toward the lift pump.
5. Assemble the hoses to the strainer and tighten the hose clamps.
6. Remove air from the fuel system (see ìBleeding Fuel Systemî on
page 121).
7. Close and latch the engine cover.
250
OH2710
OU0940
1
2
3
4
5
6
3