Lull 644E-42 Operation Manual - Manual (Page 117)

General Maintenance
115 Model 644E Origin 3/04
B. Oil and Filter Change
(250 Hour Intervals)
1. Operate the engine until
warm (approximately 5
minutes).
2. Level the vehicle, ground the attachment, place the travel select lever in
the (N) NEUTRAL DETENT position, come to a complete stop, engage the
parking brake switch and shut off the engine.
3. Unlatch and open the engine cover.
4. Place a receptacle under the engines oil pan drain plug (4). The drain plug
is located under the engine on the frame side.
5. Remove the drain plug (4) and drain the oil from the engine oil pan.
6. Allow the oil to drain completely into the receptacle. Transfer the oil to a
container with a cover and label the container as used motor oil. Dispose of
properly.
OS0830
250
OH2710
OU0303
4