Apple Color StyleWriter 6500 - Manual (Page 71)

Materials you can print on
Print material Special instructions
Plain paper m Use 16- to 36-pound paper.
Coated paper
m
Use only paper designed for this printer.
m The whiter side should face down.
Index cards
m
The print side should face down, short end first.
Glossy paper m Use only paper designed for this printer.
m The shinier side should face down.
Transparencies
m
Use only transparencies designed for this printer.
m
The transparency may have a paper backing or a
paper tape on one edge. The paper or the tape
should face up going into the printer.
m The edge where the paper and transparency are
joined or the taped edge of the transparency should
go into the paper tray first.
Envelopes m Make sure the envelope flap is folded down flat.
The print side should face down, withe the flap on top
and to the right.
Labels m To prevent misfeeds, put about 5 sheets of plain
paper under the stack of labels you insert.
m Put the labels in the tray face-down.
m Use the printer software to identify Plain as the
paper type.
For more information about paper sizes and specifications, see Appendix A.
64 Chapter 5