Apple Color StyleWriter 6500 - Manual (Page 67)

Printing transparencies
For best results, use Apple Color Ink-Jet Transparency Film or transparencies
designed for ink-jet printers.
1 Use the printer software on your computer to choose “transparency” as the paper type.
2 Insert the transparencies into the paper tray, shiny side down, with the joined edge into
the paper tray first.
3 Slide the paper adjusters in so they touch the edges of the stack.
4 Use your printer software to start printing.
In printing transparencies, the printer uses more ink, puts it on the
transparency surface more slowly, and allows more time for inks to dry
between sheets. For these reasons, transparencies take a while to print. As an
added precaution, give the ink additional time to dry.
If the transparency has a paper
backing, load it paper side up.
The edge where the paper and
transparency are joined should
go into the printer first.
If the transparency has a paper-tape
strip, load that end first, with the tape
side up.
Paper-backed transparency
Single layer transparency
59 Loading Paper and Other Materials