Apple Color StyleWriter 6500 - Manual (Page 24)

4 Connect the printer to the network in one of these two ways:
m To connect the printer to the end of a LocalTalk network, use the LocalTalk
cable to connect the unused socket of the nearest device’s connector box to
the printer’s connector box.
Note: The printer’s connector box may need a terminator placed in the
unused socket for the LocalTalk network to work properly. Check the
instructions that come with your LocalTalk Connection Kit for further
information.
m To connect the printer between two devices on a LocalTalk network,
disconnect one LocalTalk cable from the connector box or the device
immediately to the left or right of the printer and plug it into the new
printer’s connector box. Then use the new LocalTalk cable to connect the
free socket on the printer’s connector box to the socket you freed on the
other device’s connector box.
15 Setting Up Your Printer