Apple Mac mini (original) - Manual (Page 91)

Appendix C Connecting to the Internet 91
4 Click AirPort and select options for joining an AirPort Extreme network after restarting
or when your computer wakes from sleep.
5 Click Apply Now.
Once you configure your AirPort settings, you are ready to connect.
To test your AirPort Extreme connection:
m Click the AirPort status icon in the menu bar and choose Turn AirPort On.
Any AirPort Extreme network in range should appear in the menu.
Troubleshooting Your Connection
Cable Modem, DSL, and LAN Internet Connections
If you can’t connect to the Internet using your cable modem, DSL, or local area network
(LAN), see the following steps.
Important: Instructions that refer to modems do not apply to LAN users. LAN users
may have hubs, switches, routers, or connection pods that cable and DSL modem users
do not. LAN users should contact their network administrator rather than an ISP.
Check the cables and power supplies
Make sure all modem cables are firmly plugged in, including the modem power cord,
the cable from the modem to the computer, and the cable from the modem to the
wall jack. Check the cables and power supplies to Ethernet hubs and routers.
Turn the modem on and off and reset the modem hardware
Turn off your DSL or cable modem for a few minutes, then turn it back on. Some ISPs
recommend that you unplug the modem’s power cord. If your modem has a reset
button, you can press it either before or after you turn the power off and on.
LL2845Q88.book Page 91 Thursday, November 18, 2004 4:23 PM