Brother FAX-775Si - Manual (Page 59)

A U T O D I A L N U M B E R S A N D D I A L I N G O P T I O N S 7 - 6
Search
You can search for names you have stored in One Touch and Speed Dial memories.
Names are shown alphabetically or numerically. (See Storing One Touch Dial
Numbers, page 7-1 and Storing Speed Dial Numbers, page 7-2.)
1
Press Search/Speed Dial, and then enter the first letter of the name.
2
Press or to search alphabetically and to search numerically.
3
When the LCD shows the name you want to call, pick up the handset for a voice call.
4
Press Fax Start to begin dialing.
5
If you pressed Hook to dial the call, pick up the handset when the other party answers.
(The speaker works only one way; the other party won’t be able to hear you unless you
pick up the handset.)
6
When the call is over, hang up to end the call.
Redial
If the last number you dialed was busy, press Redial/Pause for easy dialing.
Broadcasting
Using the numbers you have stored in Groups, One Touch and Speed Dial memory,
you can “broadcast” faxes automatically to a maximum of 57 different locations in a
few simple steps.
After the Broadcast is completed, a Broadcast Report will be printed automatically to
let you know the results.
1
Insert the document in the ADF.
2
Press Quick Scan. The LCD shows how much memory is available.
3
Enter the One Touch and Speed Dial numbers (one after the other) or a Group Number
you have stored.
4
Press Fax Start. The FAX stores the document in memory, then transmits it to all the
numbers you entered. If the line is busy, your machine will redial.
Press Stop/Exit during transmission to cancel the current fax broadcast.
or