Setting volume amplify, Setting the speaker volume, Setting the ring volume – Brother FAX-775Si User Manual
Page 40: Memory storage
4 - 5
I N I T I A L S E T U P
Setting Volume Amplify
Please carefully read Setting the Handset Volume before you do the following steps:
1
Press Menu/Set, 1, 4.
2
Press
to select
VOL AMPLIFY:OFF?
if
none of the users are hearing-impaired and go to
Step 4—OR—If some or all of the users are hearing-
impaired, select
VOL AMPLIFY:ON?
and then press Menu/Set.
3
Press
to select
PERMANENT?
if all the users
are hearing-impaired—OR—Select
TEMPORARY?
if only some of the users are
hearing-impaired.
4
Press Menu/Set.
5
Press Stop/Exit.
Setting the Speaker Volume
You can adjust the speaker volume by pressing Hook, and then selecting a speaker
volume level.
Press
to adjust the volume level. The LCD shows the setting you are choosing.
Each key press changes the volume to the next setting. The new setting will remain
until you change it again.
Setting the Ring Volume
You can adjust the ring volume when your fax machine is idle. You can select a ring
volume level or press until the ring is off.
Press
to adjust the volume level. With each key press, the fax machine rings so
you can hear the current setting and the LCD shows the setting you are choosing. Each
key press changes the volume to the next setting. The new setting will remain until you
change it again.
Memory Storage
In the event of a power failure, all settings in the
INITIAL SETUP
,
SETUP
RECEIVE
,
SET AUTO DIAL
and
REMOTE FAX OPT
plus the
COVERPG SETUP
and
COVERPAGE MSG
(from
SETUP SEND
) functions are
stored permanently. You may have to reset the date and time.
4.VOLUME AMPLIFY
VOL AMPLIFY:OFF?
or
PERMANENT?
or
or
or