Apple Mac Pro (Mid 2010) User Manual
Page 111
111
Chapter 5
What’s Under the Hood
Analog audio line in (typical values)
Based on a typical situation with playback of a 1 kHz, -3 dBFS 24-bit sine wave, 44.1 kHz
output sample rate, unless otherwise specified below.
Â
Maximum input voltage: 2 V
rms
(+8.2 dBu)
Â
Input impedance: Greater than 17 kilohms
Â
Signal-to-noise ratio: Greater than 90 dB
Â
Total harmonic distortion + noise: Less than -85 dB (.006 percent)
Â
Channel separation: Greater than 85 dB
Analog audio line out (typical values)
Based on a typical situation with playback of a 1 kHz, -3 dBFS 24-bit sine wave, 44.1 kHz
output sample rate into 100 kilohms, unless otherwise specified below.
Â
Output voltage: 2 V
rms
(+8.2 dBu)
Â
Output impedance: 33 ohms
Â
Signal-to-noise ratio: Greater than 90 dB
Â
Total harmonic distortion + noise: Less than -85 dB (.006 percent)
Â
Channel separation: Greater than 85 dB
External microphone input using the headphone jack (typical values)
Based on a typical situation with playback of a 1 kHz, 28 mV
rms
sine wave, 44.1 kHz input
sample rate, 24-bit sampling, unless otherwise specified below.
Â
Maximum input voltage: 39 mV
rms
(-26 dBu)
Â
Input impedance: Greater than 1 kilohm
Â
Signal-to-noise ratio: Greater than 60 dB