Apple Power Macintosh 7500 Series - Manual (Page 61)

2 Attach one end of the video cable to the Video Out port on the VCR or camera.
Follow the directions that came with the VCR or camera.
3 Plug the other end of the video cable into either the S-video input port ( æ ) or the
composite video input port ( ˜ ) on the Macintosh.
If the connector doesn’t slide easily into the port, realign it and try again.
Don’t use force, which could damage the computer or cable.
4 Plug the RCA connectors on the audio cable into the left and right Audio Out ports on
the VCR or camera.
5 Plug the RCA connectors on the audio cable into the left and right audio input ports ( - )
on the computer.
Composite video connection for input from a VCR
Composite video
input port
Audio input
ports
(left and right)
Video Out
port
Audio Out ports
(left and right)
Triple RCA-plug cable
(available at most electronics supply stores)
VCR
˜ -
51 Connecting Additional Equipment