Apple QuickTime Conferencing ISDN Kit - Manual (Page 6)

Installing the H.320 card
The H.320 card may have already been installed in your computer by an
authorized service representative; if it was not, follow these steps:
1 Refer to the manual that came with your computer. Locate the chapter that explains how
to install an expansion card. Follow the instructions to remove the computer’s cover.
2 Plug the connector at the end of the H.320 card’s ribbon cable into the computer’s
DAV port.
3 Install the card. (Follow the instructions in the manual that came with your computer.)
The illustrations that follow show the card installed in each model of computer.
Power Macintosh 7500 and Power Macintosh 7600
DAV connector
Ribbon cable
H.320 card
(front of computer)
6