Apple QuickTime Conferencing ISDN Kit - Manual (Page 14)

Tips and reference
This section includes:
m tips on how to configure QuickTime Conferencing for use over an H.320
ISDN connection or the Internet over ISDN
m explanations of the line status messages that appear in the ISDN Setup
control panel
m explanations of the H.320 activity information that appears in the ISDN
Setup control panel
Configuring QuickTime Conferencing for use over different networks
You can use the QuickTime Conferencing ISDN Kit to connect with other
QuickTime Conferencing users over either a direct H.320 ISDN connection or
the Internet. You need to configure your QuickTime Conferencing software
according to your connection method.
The following table summarizes the default settings for each type of
connection. For detailed steps on how to configure the QuickTime
Conferencing software, see the online Apple Media Conference Guide.
Connection Network * Call using Audio Video
type connection port (Network Protocol) compression compression
H.320 ISDN MacPPP H.320 G.728 *** Hardware
H.261
Internet via
m ISDN MacPPP TCP/IP µGSM ** Software
H.261
* Select the network connection port in the TCP/IP control panel.
** Sample rate = 8 kHz, 8 bit, mono
*** Sound source = Hardware H.320
14