Apple Power Macintosh 5200/75 LC - Manual (Page 71)

5 Click Init to initialize the hard disk.
6 If a message appears asking you to name the disk, type a name and then click OK.
7 Click Quit when you see a message reporting that initialization was successful.
If a message reports that initialization failed, try again. If initialization fails
a second time, take the disk to your Apple-authorized service provider for
repair.
Repairing a damaged disk
Disks can become damaged by repeated use and handling.
When do you need to repair a disk?
If you see a message reporting that a disk is damaged or unreadable, you may
need to repair the disk.
Try these suggestions first
If you can’t start up from a hard disk or you don’t see the hard disk icon on the
desktop, try the following:
m If the hard disk is internal, shut down your Macintosh, wait at least 10
seconds, and then turn it on again.
m If the hard disk is external, make sure that it is turned on and that its cable
is connected firmly; then restart the Macintosh.
m If the hard disk is your startup disk, start up with a different startup disk.
If the hard disk’s icon appears on your desktop, reinstall system software
on the hard disk (see “Installing or Reinstalling System Software” later
in this chapter).
64 Chapter 5