Apple Power Macintosh 5200/75 LC - Manual (Page 101)

This appendix contains instructions for installing an LC-PDS card or a
communication card. To install a video input card, an external video
connector kit, or a TV tuner card, follow the instructions that came with
the kit or card.
Installing any expansion card involves three steps:
m opening the computer
m inserting the card into a specific slot
m closing the computer
WARNING To avoid damaging your computer and expansion card, do not
attempt to install any expansion card without first checking the
documentation for that card. If the documentation specifies that an
Apple-certified technician must install the card (usually because
the installation requires special training or tools), consult the service
and support information that came with your computer for instructions
on how to contact an Apple-authorized service provider or Apple for
assistance. If you attempt to install the card yourself, any damage you
may cause to your computer or card will not be covered by the limited
warranty on your computer. If the card is not an Apple-labeled product,
check with an Apple-authorized dealer or service provider to see if you
can install it yourself.
Video-in slot
Monitor-out slot
LC-processor-direct slot (LC-PDS)
Communication slot
Vertical plate
94 Appendix B