Apple AppleShare 3.0 File Server Controls - Manual (Page 48)

bJBSEnabled Set if Apple II boot service is enabled.
All other bits are reserved.
scNumSessions Word result value: The number of
currently opened sessions.
scUserListModDate Longword result value: The last date and
time (DateTime) that the user list was
modified. (This value is helpful in
minimizing the amount of updating needed
by a monitoring application that updates
some user list.)
scActivity Word result value: The server activity,
in percent (5%-100%).
scVolListModDate Longword result value: The last time
(TickCount) that the volume list was
modified. (This value is helpful in
minimizing the amount of updating needed
by a monitoring application that updates
some volume list.)
Result Codes noErr 0 No error.
paramErr -50 The server is not running.
SCGetSetupInfo
SCGetSetupInfo returns server setup information. The setup information record
(SetupInfoRec) is defined in the server control calls interface file. (See
Appendix B for a listing of the interface file. SetupInfoRec appears in the
"Server Control Data Types" section.)
Parameter (uses setupPB variant of SCParamBlockRec)
Block 16 ioResult word
18 scSetupPtr long
22 scMaxVolumes word
24 scMaxExpFolders word
26 scCode word
28 scCurMaxSessions word
Fields ioResult Word result value: Result code.
scSetupPtr Longword input pointer: Points to the setup
information record (SetupInfoRec) where the server
setup information will be returned, or must
contain NIL.
scMaxVolumes Word result value: Returns the maximum number of