Apple Logic Pro 8 TDM User Manual

Page 3

Global Bit Depth:

This parameter allows you to choose between 16 bit or 24 bit

playback and recording.

Note:

The DAE does not allow the use of 16 and 24 bit files simultaneously.

PT HD Type:

This parameter allows you to define the number of tracks for your

Pro Tools HD system. Each entry in the pop-up menu allows you to define the
required number of tracks, based on the number of Pro Tools HD DSPs that you want
to use (and actually have) in your system.

TDM Setup Indicator:

The TDM Setup Indicator is a small status window that shows

the current TDM process (inserting a TDM plug-in, for example). This parameter
switches the display of this window on or off.

Pass Keyboard Events to Plug-ins:

Any key commands that are not used by a plug-in

are passed on to Logic Pro. Under normal conditions, this ensures that functions like
Start and Stop will continue to work. If this isn’t the case, use the options in this
menu to specify that only certain key combinations will be passed to the plug-in. All
other key presses will be received by Logic Pro.

Digidesign Hardware Setup Button:

Opens the Digidesign Hardware Setup window

that contains all important system settings for your hardware.

Note:

The Process Buffer Range and ReWire Behavior parameters at the bottom of the

Devices tab have no effect on the DAE!