Apple Logic Pro 8 TDM - Manual (Page 12)

12
The eight output signals of this mixer are routed into the TDM Mixer. The output signals
are received by the ESB TDM inputs—chosen as input sources on the TDM aux channel
strips. In the following example, aux channels 1–8 have been set up in this fashion:
Within mono aux channel strips, you can select the desired output channel of the
DTDM Mixer (ESB 1–8). Stereo aux channels can be set to input channel pairs ESB1–2,
3–4, 5–6, and 7–8. Please take a closer look at the available inputs:
Logic Pro 8 handles mono and stereo channel settings separately. This means that you
can set up the ESB inputs for eight mono channels, and then switch the audio channels
to stereo operation. Once the desired DTDM output channels are set appropriately for
each aux input, save your project as a template. This will allow you to switch quickly
between mono and stereo setups, without needing to manually change settings each
time.