Apple Color StyleWriter Pro - Manual (Page 29)

2 Load the paper and adjust the external paper selector lever.
Print material Maximum Special instructions
Plain paper 100 sheets
m
Use 16- to 24-pound paper.
Premium coated paper 20 sheets
m
Use only those designed for this printer.
Glossy paper 20 sheets
m
Use only those designed for this printer.
m
Put one sheet of plain paper at the bottom of the
stack to prevent misfeeds.
m Specify Transparency paper type in the Print dialog box.
Envelopes 15 m Make sure the envelope flap is well creased.
Transparencies 20 m Use only those designed for this printer.
m The shiny side should be toward you.
m The edge where the paper and transparency are
joined should be at the bottom.
Back-print film 20
m
Use only those designed for this printer.
m
Put one sheet of plain paper at the bottom of the
stack to prevent misfeeds.
m The chalky side should be toward you.
Labels 20
m
Put one sheet of plain paper at the bottom of the
stack to prevent misfeeds.
m The labels should be toward you.
m Specify Plain as the paper type in the Print dialog box.
Slide this guide so
it just touches the
edge of the paper.
Move the paper selector lever to the
envelope icon (
E
) for envelopes
and to the paper icon (
∂
) for
everything else.
Insert envelopes this way.
(Make sure the flap is well
creased.) Insert letterhead paper
face up with the top of
the page inserted first.
Insert three-hole punch paper so
that the holes line up along this side.
IMPORTANT Load only one
kind of material at a time into
the printer.
23 Using Your Printer