Apple Macintosh LC 630 - Manual (Page 103)

Closing the computer
1 Slip the base of the logic board into the guide rails inside the computer case and swing
the handle back into its storage position.
2 Press the reset button on the logic board, and then slide the logic board back into the
computer.
1 Press the reset button.
2 Gently but firmly
push on the vertical
plate until the logic board
is solidly back in place.
Make sure the logic board slides
into the guides that are on both
sides of the computer’s interior.
Swing the handle up,
into its storage position.
95 Installing an Expansion Card