Power supply – Apple Mac Pro (Early 2009) User Manual
Page 103
Chapter 5
What’s Under the Hood
103
 Signal-to-noise ratio: Greater than 90 dB
 Total harmonic distortion + noise: Less than -85 dB (.006 percent)
 Channel separation: Greater than 85 dB
External microphone input using the headphone jack (typical values)
Based on a typical situation with playback of a 1 kHz, 28 mV
rms
sine wave, 44.1 kHz
input sample rate, 24-bit sampling, unless otherwise specified below.
 Maximum input voltage: 39 mV
rms
(-26 dBu)
 Input impedance: Greater than 1 kilohm
 Signal-to-noise ratio: Greater than 60 dB
 Total harmonic distortion + noise: Less than -60 dB (0.1 percent)
 Frequency response: 100 Hz to 8.2 kHz, +0.5 dB/-3 dB
Power Supply
AC line input
 Voltage ranges: 100–240 V alternating current (AC)
 Current: Maximum of 12 A (low voltage range) or 6 A (high voltage range)
 Frequency: 50–60 Hz single phase
Power Requirements for Expansion Cards and Peripherals
Expansion cards
Combined maximum power consumption for all four PCI Express slots should not
exceed 300 watts (W).
USB devices
Each of the computer’s built-in USB ports is allotted 500 mA.