Apple PowerBook G3 - Manual (Page 18)

18 Chapter 1
Setting Up the Computer
Now that you know some essential details about your PowerBook, you’re ready to set it up
and begin using it. Setting up your Macintosh PowerBook for the first time is a quick and
simple process. However, there are a few items that you need to have and things to do before
you begin using your PowerBook.
Your PowerBook Battery
The battery that came with your PowerBook computer may be already inserted in an
expansion bay. If not, you should insert it now so that it can be charged.
You can easily tell if the battery is already installed by looking at the left expansion bay. If you
see an opening for a floppy disk, then the floppy disk drive module is installed and the
battery is not installed. If you see a small button with four small lights to its right, the battery
is installed.
If Your PowerBook Did Not Come With the Battery Installed
If your PowerBook did not come with the battery inserted in the expansion bay, you should
insert it in place of the floppy disk drive module in order to charge it.
To remove the floppy disk drive module and insert the battery, follow these steps:
1 Place your PowerBook on a hard flat surface.
Important Before following the setup instructions in this chapter, you may want to read
“Arranging Your Work Area and Equipment” on page 87 for tips on adjusting your work
furniture and computer so that you’re comfortable when using the computer.
PowerBook battery
PowerBook battery inserted
in the left expansion bay Floppy disk drive module
inserted in the left expansion bay