AEM Infinity v96 Infinity EMS Version 2.96 Upgrade Notes - Manual (Page 5)

5
© 2014 AEM Performance Electronics
1) Connect to Infinity Tuner.
a. Plug the USB cable from the ECU into your computer USB port and key ignition
ON.
b. Open Infinity Tuner.
2) Click the Target drop-down list and select “Upgrade firmware…”
3) The ECU should not be running an engine at this time. Select “Yes” when the warning
message appears.
Note: The firmware update utility is periodically updated and may not match the
descriptions below. In the event of a conflict, please follow the instructions provided in
the dialog windows themselves or supplemental instructions provided by AEM.
Important Note: BEFORE beginning the update process, be sure to have a
saved copy of your tuned session file. If a power failure occurs during the
update process, this is the only way to ensure that the calibration data is not
lost.