AEM 30-5135M Analog Oil Metric Pressure Gauge - Manual (Page 6)

Page 6
Specifications
Gauge
Supply Current
0.1 A
Differential Analog Outputs 1
Measuring Range 0 PSI
– 100 PSI
0 Bar to 6.9 Bar
Operating Voltage (nominal) 8.5-15 volts dc
Harness & Connector Temp Limit: 105C
Notes
The sensor is a precision pressure measuring device and should not be subject to
mechanical or thermal shock or it may be damaged.
If further tuning help is needed be sure to visit the video gallery or performance
electronics forum at www.aemelectronics.com for comprehensive instructional videos
and information.
Replacement Components
35-3411
8-Pin Power Harness
35-3412 3-Pin Sensor Harness
35-2131-100 Pressure Sensor
12 MONTH LIMITED WARRANTY
Advanced Engine Management Inc. warrants to the consumer that all AEM High Performance products will be free from defects in
material and workmanship for a period of twelve (12) months from date of the original purchase. Products that fail within this 12-
month warranty period will be repaired or replaced at AEM’s option, when determined by AEM that the product failed due to defects
in material or workmanship. This warranty is limited to the repair or replacement of the AEM part. In no event shall this warranty
exceed the original purchase price of the AEM part nor shall AEM be responsible for special, incidental or consequential damages
or cost incurred due to the failure of this product. Warranty claims to AEM must be transportation prepaid and accompanied with
dated proof of purchase. This warranty applies only to the original purchaser of product and is non-transferable. All implied
warranties shall be limited in duration to the said 12 month warranty period. Improper use or installation, accident, abuse,
unauthorized repairs or alterations voids this warranty. AEM disclaims any liability for consequential damages due to breach of any
written or implied warranty on all products manufactured by AEM. Warranty returns will only be accepted by AEM when
accompanied by a valid Return Goods Authorization (RGA) number. Product must be received by AEM within 30 days of the date
the RGA is issued.
Please note that before AEM can issue an RGA for any product, it is first necessary for the installer or end user to contact the AEM
Performance Electronics tech line at 1-800-423-0046 to discuss the problem. Most issues can be resolved over the phone. Under
no circumstances should a system be returned or a RGA requested before the above process transpires.
Need additional help? Contact the AEM Performance Electronics tech department at
1-800-423-0046 or [email protected], or visit the AEM Performance Electronics
forum at http://forum.aempower.com/forum/