AEM 30-3322 V2 Water Methanol Conductive Fluid Level Sensor and Flying Lead Connector - Manual

Page 1
Water/Methanol
Injection Level Sensor V2*
30-3322
This product is legal in California for racing vehicles only and should never
be used upon a highway. This product is legal solely for vehicles used in
competition which may never be used upon a public road or highway.
*AEM’s conductive fluid sensor is only compatible with the new
Water/Methanol V2 Controller (30-3304, 30-3306, 30-3305) and NOT
compatible with the V1 controller.
ADVANCED ENGINE MANAGEMENT INC.
2205 126 th Street Unit A, Hawthorne, CA. 90250
Phone: (310) 484-2322 Fax: (310) 484-0152
http://www.aemelectronics.com
Instruction Part Number: 10-3322 Rev A
 2013 Advanced Engine Management, Inc
WARNING:
!
Improper installation and/or adjustment of this product can result in
major engine/vehicle damage! Use of this injection system requires
proper tuning! Use this system with EXTREME caution! If you are
uncomfortable with anything about this, please refer the installation to
an AEM trained tuning shop or call 800-423-0046 for technical
assistance. You should also visit the AEM Performance Electronics
Forum at http://www.aemelectronics.com
NOTE: AEM holds no responsibility for any engine damage that
results from the misuse of this product!