beautypg.com

Drill template – AEM 30-2500 AQ-1 Data Logging System User Manual

Page 22

background image

Page 22

10-2500 AQ1 Instructions RevD 102512.doc



DRILL TEMPLATE


A drill template is provided to aid in determining mounting hole locations when mounting
the AQ1 Data Logger. Before drilling any holes, make sure the drill template is printed
to the proper size. The two vertical lines on the drill template are spaced one inch apart
when the drill template is printed to the proper size. Verify the two vertical lines are one
inch apart on the printed drill template. Due to variances in printers, the print size may
need to be adjusted if the two vertical lines are not one inch apart.


Figure 27. AQ1 Data Logger Mounting Drill Template.