Rock-Slide Engineering Ford Super Duty Step Slider - Manual (Page 7)

Installation Instruction RSEI 141
18. Attach the slider to the top bracket using the stainless steel bolts. Don’t forget to use
the anti-sieze on each stainless steel bolt
19. Tighten the bolts from the back bracket to the step slider body
20. These holes are elongated to allow for any adjustments that need to me made.
21. When the slider is mounted make sure that you have not twisted or manipulated the
shape of the slider with you tightening sequence. THIS WILL CAUSE THE STEP TO NOT
WORK PROPERLY.
22. Attach the strengthening bracket.
a. This bracket will stiffen the step slider. Loosen the body mount bolt at the
center of the truck behind the step slider