Rock-Slide Engineering TAILGATE TABLE - Manual (Page 2)

Rock Slide Instruction RSEI 121
Parts List
1-Tailgate Table
6-Self-Tapping machine screws
2-Captive Pins
1-Rubber strip
TAILGATE TABLE INSTALLATION
1. Attach the Captive Pins to your Tailgate Table. These pins hold your tailgate
together when it is in the closed position
a. The pins have two parts to each side. The small piece slides from the inside
of the table top and the large piece screws on the small piece with the table
top sandwiched between the pieces
Captive Pins
2. Choose the location to mount your Tailgate Table
3. If mounting on a Jeep JK Model, some of the black plastic trim covering the 3
rd brake
light wires on the tailgate will need to be removed
Insert small part
of captive pin
through the inside
of table top
Large half of
captive pin on
the outside of
table top