Hornady AP with Case Feeder - Manual (Page 9)

9
Step 4: Mounting the square tubing brackets on to the square tubing.
See Figure 4 for more details.
Figure 4: Square tubing brackets with square tubing.
• Place the ¼” Flat Washers (#48) on the ¼-20 x 1 ¼” Socket Head Cap Screw
(SHCS) (#47).
• Place one SHCS thru the Square Tubing (#49) and into one of the Square Tubing
Brackets (#45) as shown and tighten finger tight.
• Repeat for the second Bracket.
¼-20 1 ¼” Cap Screw (Full Size)