Hornady AP with Case Feeder User Manual
Page 4
4
Hornady
Lock-N-Load Auto Progressive
Your new AP Case Feeder has been packaged to insure minimal shifting and damage
during transportation.
Remove all the parts from the shipping box and spread them out over a large flat surface.
Refer to the parts list on pages 28-29 to make sure all necessary parts are identified.
The manual provides step-by-step instructions and suggestions that make set-up and
operation easy and understandable.
• Remember, everything is designed and machined to fit easily together without
modification. If you find that it is necessary to force parts together, stop and
check the instructions and illustrations we have provided.
List of needed hand tools:
• 3/8” wrench
• 7/16” wrench
• 9/16” wrench
• 1/8” Allen wrench
• 5/32” Allen wrench
• 3/16” Allen wrench
• Pliers or vise grips
• Small hammer