PureFlow AirDog FP-150 - 6.0L Ford 2003-2007 - Manual (Page 6)

6
AirDog
®
FP-100 & FP-150 Ford PowerStroke 2003-2007 6.0L
Section 2 Installation & Safety Guidelines
AirDog
®
MODEL FP-100 & FP-150
The installation of your AirDog
®
can be made relatively easy by following the steps outlined
in this manual, and:
1. Inventory the package components completely. Notify PUREFLOW
®
AIRDOG
immediately of any parts missing or damaged.
2. Read the installation manual completely. Understand how the system operates and
installation recommendations before beginning installation.
3. The installation recommendations contained herein are suggested installation guidelines
only. Individual installations may vary.
4. If any installation procedure is uncertain, contact PUREFLOW
®
AIRDOG for technical
assistance.
5. When installing the AirDog® fuel lines be sure to keep the ORIGINAL ENGINE
RETURN LINE connected as it is from the factory!
SAFETY GUIDELINES!
CAUTION! Please be sure to chock the vehicle’s tires to prevent rolling.
CAUTION! Please use proper supports when working beneath an
elevated vehicle.
CAUTION! Most diesel pickups have two (2) 12volt batteries. Disconnect the battery
cables to both batteries before proceeding with the AirDog
®
installation.
CAUTION! Vehicle frame rails should not be drilled into or welded upon.
CAUTION! Wear safety glasses when operating power tools such as drills and grinders or
when using a punch or chisel.
CAUTION! Use common sense when routing fuel lines and electrical harnesses. Keep
them away from hot exhaust components and/or moving parts. Properly secure
lines to prevent chaffing.
Use Good Judgment and Common Sense When Installing the AirDog
®
!