PureFlow AirDog FP-150 - 6.0L Ford 2003-2007 - Manual (Page 3)

3
OVERVIEW
Welcome to PureFlow
®
AirDog
®
Fuel Air Separation, Filtration and Delivery System for the Diesel Engine
The AirDog
®
Fuel Air Separation system is a Premium lift pump and filtration
system for the Ford PowerStroke 6.0L diesel engine. A complete installation kit
is included.
The AirDog
®
delivers clean fuel to the engine free of virtually all air/vapor and
at a positive flow. Thus, allowing the engine “test cell” performance and
efficiency, while in “real world” use.
The AirDog
®
FP-100 flows 100 GPH and is recommended for stock and
slightly modified PowerStroke Diesels.
The AirDog
®
FP-150 is recommended for highly modified PowerStroke
Diesels.
PureFlow products are manufactured with a personal touch,
unsurpassed attention to detail
and
the most stringent quality control!
TYPICAL INSTALLATION LAYOUT
Figure 1
The AirDog
®
draws fuel from the fuel tank at a constant flow, removing water, particulates,
and air/vapor while maintaining a regulated pressurized fuel flow to the stock OE high
pressure pump. The separated air/vapor is returned by the AirDog
®
to the fuel tank.
NOTE: The pictures used in this manual are for example only and may not be exactly the
same as your truck.
High Pressure
Fuel Pump