Engine’s ecm, Pureflow airdog airdog, The airdog – PureFlow AirDog DF-200 - Dodge Cummins 2005-2013 User Manual
Page 19: Is controlled by the, Wiring diagram (in red), Figure 40, Figure 41
19
Power Supply Red +
Power Supply Black -
PureFlow AirDog
AirDog
®
II DF-200 Dodge 2005 - 2011
Section 6 Electrical Harness
The AirDog
®
wiring harness features water proof Deutsch connectors,
relay, and fuse holder. When properly installed, the AirDog
®
is controlled
by the
engine’s ECM.
WIRING DIAGRAM (In Red)
Figure 40
The AirDog
®
is activated by the ECM through a relay controlled wiring harness connecting
directly to the original ECM Deutsch pump connector.
Figure 41
CAUTION: If the OPTIONAL Low Pressure Indicator Light is not used, be sure to insulate
the two (2) #10 Indicator Light connectors to prevent accidental contact.
Pressure Sensor Lead
Motor Power Supply Lead
Low Fuel Pressure
Indicator Light Leads
Female Power Lead Jumper
Plugs into Fuel Module
Male Power Lead Jumper
Plugs into Factory Harness