PureFlow AirDog DF-200 - Dodge Cummins 1998.5-2004 - Manual (Page 17)

17
PureFlow AirDog
AirDog
®
II DF-200 Dodge 1998 ½ - 2004
Section 5-D Fuel Return Line
Fuel Return Line from the AirDog
®
to the Tank
Installing the fuel 'Return to Tank' assembly in Filler Tube
Figure 35
5D-1. Cut filler tube as illustrated, removing ½ inches. Loose assemble clamps on each end of
filler tube. (Figure 35)
Figure 36 Figure 37
5D-2. Insert “Return Fuel Filler Tube” assembly in filler tube. INSTALL THE FILLER TUBE
WITH ARROWS POINTING TOWARD THE TANK!! SEE FIG 36.
Properly tighten clamps.
5D-3. Insert the female quick connect end (Figure 37) of the “Return Hose Assembly” into the
previously installed male fitting for the tank port (step 4-4). The fitting will “click” when
properly installed.
5D-4 Attach the other end of the “Return Hose Assembly” onto the male end form of the
“Return Fuel Filler Tube” installed in step 5C-2. A” click” will be heard when the fitting
is properly connected.
5D-5 Any excess fuel hose can be addressed by routing the hose in a fashion to take up the
extra length, or a section of the hose can be removed. Push lock splices have been
included if you choose to remove the excess hose.
Fuel Tank
Hose Clamp
Filler
Tube
Fuel
Return
Fitting