PureFlow AirDog DF-165 - Dodge Cummins 1994-1998 - Manual (Page 6)

6
PureFlow AirDog
AirDog®II Dodge Cummins 1994 - 1998
Section 2 Installation & Safety Guidelines
AirDog
®
II
INSTALLATION GUIDELINES!
The installation of your AirDog
®
II can be made relatively easy by following the steps
outlined in this manual, and:
1. Inventory the package components completely. Notify PUREFLOW
®
AIRDOG
immediately of any parts missing or damaged.
2. Read the installation manual completely. Understand how the system operates and
installation recommendations before beginning installation.
3. The installation recommendations contained herein are suggested installation
guidelines only. Individual installations may vary.
4. When installing the fuel module up-grade, be sure to drill the two additional ½” fuel
ports as shown!
5. When installing the AirDog®II fuel lines, be sure to connect the ORIGINAL
ENGINE RETURN LINE to the fuel tank as it was from the factory when the
installation is complete!
If any installation procedure is uncertain, contact
PUREFLOW
®
AIRDOG for technical assistance.
SAFETY GUIDELINES!
CAUTION! Please be sure to chock the vehicle’s tires to prevent rolling.
CAUTION! Please use proper supports when working beneath an elevated vehicle.
CAUTION! Most diesel pickups have two (2) 12volt batteries. Disconnect the
battery cables to both batteries before proceeding with the AirDog
®
II
installation.
CAUTION! Vehicle frame rails should not be drilled into or welded on.
CAUTION! Wear safety glasses when operating power tools such as drills and grinders or
when using a punch or chisel.
CAUTION! Use common sense when routing fuel lines and electrical harnesses. Keep
them away from hot exhaust components and/or moving parts. Properly
secure lines to prevent chaffing.
NOTE: The pictures used in this manual are for example only and may not be exactly the
same as your truck.