PureFlow AirDog DF-165 - Dodge Cummins 1994-1998 - Manual (Page 17)

17
PureFlow AirDog
AirDog
®
II Dodge 1994-1998
Section 5 E Fuel Lines
Fuel Suction Line for AirDog
® II DF-165
5E-1.
Insert the female quick connect end (see figure 41) of the
“Suction Hose Assembly” to the male fitting previously
installed in the “Fuel In” port. A “click” will be heard when
the fitting is properly connected.
Figure 41
5E-2. Refer to the installation instructions within the fuel module upgrade kit. Install the
fuel module upgrade kit.
5E-3. Attach the female quick connect end of the “Suction Hose Assembly” to the bulk
head male quick connect installed during the fuel module upgrade. (see Fig 42). A
“click” will be heard when the fitting is properly connected.
Figure 42
NOTE: Figure 42 is for visual reference only. The fuel module in your vehicle may appear
different.
5E-4 Any excess fuel hose can be addressed by routing the house in a fashion to take up the
extra length, or a section of the hose can be removed. Push lock splices have been
included if you choose to remove the excess hose.
.