L.B. White Oval 80™ Radiant - Manual (Page 12)

INSTALLING REFLECTORS
Refer to Fig. 8 for the following instructions:
1. Attach end cap to non-notched end of a reflector. Use
4 U-clips.
2. Slide the reflector through the hangers until end cap is
up against burner box.
3. Slide remaining reflectors over tubes. Overlap the
reflectors 2-3 inches. Non-notched ends overlap
notched ends.
4. Attach remaining end cap to last reflector with U-clips.
FIG. 8
12
2-3”