Fluid Management VR-1 Mixer - Manual (Page 9)


Fluid Management Customer Service 1.800.462.2466 8 | V-Series
Getting to Know Your V-Series Mixer
Tips to improve operations
These tips will help improve the operation of your V-Series Mixer:
• DO NOT mix dented or damaged cans
• DO NOT mix flammable materials or solvent based colorants
• DO NOT run the mix without a container in place
• For optimal performance, DO NOT run mixer on carpet, countertops, or tables
• Seal the paint container tightly before mixing to prevent any spills
• Press the red Emergency Button to stop the machine in an emergency
• When the red LED is lit on the display, the machine has power
• Position the containers correctly to ensure best mixing results
• Make sure the mixer is level and the position where it will be operating
• The mixer will stop running if the door is opened during operation
• Follow the preventative maintenance procedures in this guide.
Warnings
ALWAYS shut off the power
and unplug your machine
from the AC power outlet
before servicing.
This unit must be plugged
into a dedicated electrical
line. This includes: 15 Amp
line for 120 Volt equipment
The surface the mixer sits on
must be strong enough to
support its weight.
Your V-Series Mixer has been designed so that you can set it up quickly and
begin using it right away. If you have never used a mixer, read this section for
instructions on getting started and installing your machine.