Fluid Management VR-1 Mixer - Manual (Page 13)


Fluid Management Customer Service 1.800.462.2466 12 | V-Series
Basic Operations
Using the adapter
The adapter is used to mix quarts and pints. Each can shape is molded into the adapter.
1
Open the adapter.
Select the appropriate adapter to match the paint container size.
2
Place the paint container in adapter.
(See Figures 8 and 9.)
3
Close the adapter and insert into the mixer can holder.
Make sure the adapter handles fit against the reinforced side of can holder.
(See Figure 10.)
4
Clamp both lid retainers over the adapter.
(See Figure 11.)
5
Follow Basic Operation-Mixing steps to begin mixing.
Figure 8
Figure 9
Figure 10
Figure 11