Fluid Management VR-1 Mixer - Manual (Page 5)


Fluid Management Customer Service 1.800.462.2466 4 | V-Series
About this Guide
Safety Precautions
• Read this guide and all
warning labels before using
the machine.
• Keep this guide in a safe
place.
• Read and adhere to all
Warning and Caution labels
on the machine.
• Prepare, level, and clear the
area where the machine will
be installed.
• To avoid risk of fire or
injury, unplug the power
before servicing electrical
components.
• DO NOT use mixer on or near
flammable or combustible
materials
• DO NOT mix flammable
materials.
• Plug into an approved
grounded outlet only. Make
sure the outlet meets all
national and local codes.
• To reduce the risk of electric
shock or injury, use indoors
only.
• This mixer contains moving
parts. Tightly seal the
container before operating.
How to Use this Guide
This guide is organized into eleven sections. Each section provides detailed
information on V-Series Mixer topics and provides a basic reference that can be used
to help you with specific issues.
Important: Carefully read all the installation instructions and the safety
information before you first use your V-Series Mixer .
This guide provides instructions for safely and easily installing your V-Series Mixer
when it arrives. This publication also includes operational instructions, daily and
preventative maintenance procedures, basic troubleshooting suggestions, adapters to
use for various can types, customer service, and warranty information.
If you are an experienced user, you may already know enough to get started. Make
sure you look over the information in Getting to Know Your V-Series Mixer to find
out about the features of this V-Series Mixer.
If you have internet access, the most current information for your V-Series Mixer is
available from the worldwide web at
http://www.fluidman.com
For Your Safety
Customer safety is important. Our products are designed to be safe and effective.
However, mixers are electrical equipment. The V-Series Mixer is safe, fast, and
reliable—designed to bring many years of operation. There are precautions you can
take to avoid damage to the equipment or bodily injury before operating. By carefully
following the instructions in this document and the warning and maintenance labels
on the machine, you can help protect yourself from hazards and create a safer work
environment.
Equipment can become damaged due to misuse or neglect. Some product damage is
serious enough that the product should not be used again until it has been inspected
and, if necessary, repaired by a Fluid Management authorized service technician.
As with any electronic device, pay close attention to the mixer when it is turned on.
On very rare occasions, you might notice an odor or see a puff of smoke or sparks
vent from your machine, or you might hear sounds like popping, cracking or hissing.
These conditions might merely mean that an internal electronic component has
failed in a safe and controlled manner. However, it may indicate a potential safety
issue. DO NOT take risks or attempt to diagnose the situation yourself. Contact Fluid
Management at 1-800-462-2466 for assistance.