Philips DVP3570-F7 - Manual (Page 22)

22 EN
LIST OF SETTINGS
Category Menus
Options/Sub-
Menus
Description
Audio Dual mono Stereo This unit allows you to select a sound mode.
L-ch
R-ch
Down Sampling On • When playing back disc with copyright protection, the sound will be
down sampled at 48kHz, even if you set to “Off”.
Set to “On” when outputting in 48kHz.
Set to “Off” when outputting the original sound.
Off
DRC On This function is available only on the discs which are recorded in the
Dolby Digital format.
“On” “
7 / 8 - 1 / 8 ” “Off”:
Compress the range between soft and loud sounds.
7 / 8
6 / 8
5 / 8
4 / 8
3 / 8
2 / 8
1 / 8
Off
Effect Normal You can set the reverberation effect.
Normal: no
effects (original sound)
Living Room: sounds as if you are in a living room
Hall:
sounds as if you are in a hall
Arena: sounds as if you are in an arena
Cave: sounds as if you are in a cave
Concert Hall: sounds as if you are in a concert hall
Bath Room:
sounds as if you are in a bath room
Cathedral: sounds as if you are in a cathedral
Living Room
Hall
Arena
Cave
Concert Hall
Bath Room
Cathedral
Digital Out
• Refer to page 10 for
more information.
Bitstream • Set to “Bitstream” when the unit is connected to a Dolby Digital decoder.
• When HDMI cable is connected, make sure “HDMI Audio” setting is
set to “Off” to change the “Digital Out” setting.
“Bitstream”:
Outputs a Dolby Digital signals.
“LPCM”:
Convert the Dolby Digital into LPCM (2 channel).
LPCM
Other Auto Power Off On Set to “On” to turn this unit off automatically after 30 minutes of no use.
Off
HDMI HDMI
Video Auto You cannot select the video resolutions which are not supported by the
connected TV, except when this unit’s HDMI OUT jack is connected to a
DVI compatible display devices with an HDMI-DVI cable (default is 480p
in such case).
• Video and audio signals may be distorted temporarily when switching
to / from the HDMI output mode.
HDMI Video:
• Auto: HDMI video resolution will be selected automatically depending
on the connected HDMI device. If you want to change the resolution
manually, press [HDMI] repeatedly.
• When you make a selection, the TV monitor temporarily goes blank
and then comes back again. If it does not, press [HDMI] to change the
resolution or press and hold [
B (play)] on the front panel for 5 seconds
to change the setting back to its default.
EasyLink (HDMI CEC):
• This feature is available only when the display device is connected with
an HDMI cable, and when it supports EasyLink (HDMI CEC) feature.
• Refer to page 23 for more information.
480p
720p
1080i
1080p
HDMI
Audio Bitstream
LPCM
Off
EasyLink
(HDMI CEC) On
Off
Ratings
Lock Rating
Level Off Sets the rating level for the disc playback.
8 [Adult]
7 [NC-17]
6 [R]
5 [PGR]
4 [PG13]
3 [PG]
2 [G]
1 [Kid Safe]
New PIN Sets the new password for the “Ratings Lock” setting.
Factory
Default Yes “Yes”:
Resets all the settings, except for “Ratings Lock”, in “Settings” to the
factory default.
”No”:
Does not perform the initialization.
No
Product Info “Product Info” screen provides you with the information on this unit’s
hardware and software version information.