Philips DVP3570-F7 - Manual (Page 20)

20 EN
Switching Subtitles
Some video materials may have subtitles in one or more
languages. For commercially available discs, the supported
languages can be found on the disc case. Follow the steps
below to switch the subtitle language during playback.
1) During playback, press [SUBTITLE] to bring up the
information bar.
Off
2) Use [SUBTITLE] repeatedly to switch the subtitle.
Note
• If your language is not shown after pressing [SUBTITLE]
several times, the disc may not have that language.
However, some discs allow subtitle language setting on
the disc menu. (Operation varies depending on the disc,
so refer to the manual along with the disc.)
• When “ ” appears on the TV screen, it means no
subtitle is recorded on the scene.
• Some discs will only allow you to change the subtitle
from the disc menu. Refer to the manual
accompanying the discs for details.
Switching Audio Language
When playing back a video material recorded with 2 or
more soundtracks (these are often in different languages),
you can switch them during playback.
1) During playback, press [AUDIO] to bring up the
information bar.
1/4 Dolby D 3/2. 1ch ENG
2) Use [AUDIO] repeatedly to switch the audio language.
Note
• Some discs will only allow you to change the audio
setting from the disc menu. Refer to the manual
accompanying the discs for details.
• If your language is not shown after pressing [AUDIO]
several times, the disc may not have that language.
However, some discs allow audio language setting on
the disc menu. (Operation varies depending on the
disc, so refer to the manual along with the disc.)
SELECTING THE FORMAT OF AUDIO AND VIDEO
You can select the format of audio and video as you prefer depending on the contents of the disc you are playing back.
Switching Camera Angles
Some DVD-video may have scenes shot from 2 or more
angles. Angle information should be on the disc case if
the disc contains multi-angle scenes.
You can change the camera angle if
appears on the TV
screen. If the “Angle Icon” setting is “Off” in “Display”
menu,
will not appear. (Refer to page 21.)
1) During playback, press [ANGLE] to bring up the
information bar.
1/3
2) Use [ANGLE] repeatedly to switch the angle.
Swiching Stereo Sound Mode
This unit allows you to select a sound mode during CD
playback.
1) During playback, press [AUDIO] to bring up the
information bar.
Stereo
2) Use [AUDIO] repeatedly to switch the stereo sound
mode.
Swiching Sound Menu
You can enjoy stereophonic virtual world on your existing
2 channel stereo system.
1) During playback, press [SOUND MENU] to bring up
the information bar.
OFF
2) Pressing [SOUND MENU] to switch the sound menu.
Off: no effects (original sound)
3D: sound mode suitable for setting stereophonic audio.
Jazz: sound mode suitable for jazz music
Rock: sound mode suitable for rock music
Pop: sound mode suitable for pop music
Classic: sound mode suitable for classic music
Note
• Sound Menu is available under the following
condition:
- When the unit is connected to a TV using AUDIO OUT jacks.
- When “HDMI Audio” is set to “LPCM”.
- When “Digital Out” is set to “LPCM”.