Philips VRX462AT - Manual (Page 30)

30 Playing
6
When the tape has finished rewinding, press the EJECT
button on the remote control or the STOP/EJECT button
on the VCR again to remove the tape.
• Playback options and features are
discussed on pages 49 - 57.
Helpful Hint
Read and follow the steps below to play a tape.
1
Turn on the TV and set it to channel 3 or 4, whichever the
CH3/CH4 switch on the back of the VCR is set to.
2
Insert a tape in the VCR. The power will come on. The VCR
will place itself in VCR position automatically (the VCR light will
appear on the display panel of the VCR). If the VCR light does not
appear, press the VCR/TV button once. If the tape’s record tab
has been removed, playback will start automatically.
3
If playback does not start automatically, press the PLAY
button. The PLAY light will appear on the VCR display panel.
4
Press the STOP button on the remote control or the
STOP/EJECT button on the VCR once to stop playback.
5
Press the REW(ind) button to rewind the tape.
...
...
POWER
CBL/DSS VCR TV
EJECT MUTE
MENU EXIT/STATUS CLEAR
VCR PLUS+
/ENTER LIGHT
F.ADV
PAUSE/STILL
1 2 3
4 5 6
7 8 9
100 0 GO-TO
MEMORY INDEX
VAR. SLOW
REMOTE LOCATOR
SKIP
VCR/TV SPEED SEARCH SLOW
TRACKING
STOP
REW FF
PLAY
VOL CHANNEL
/OTR REC
Turn on the TV.
3
1
Insert a tape. 2
4
5
6