Philips VRX462AT - Manual (Page 14)

...
...
POWER
CBL/DSS VCR TV
EJECT MUTE
MENU EXIT/STATUS CLEAR
VCR PLUS+
/ENTER LIGHT
F.ADV
PAUSE/STILL
1 2 3
4 5 6
7 8 9
100 0 GO-TO
MEMORY INDEX
VAR. SLOW
REMOTE LOCATOR
SKIP
VCR/TV SPEED SEARCH SLOW
TRACKING
STOP
REW FF
PLAY
VOL CHANNEL
/OTR REC
14 Setting the Clock
SET CLOCK
1 AUTO CLOCK (ON)
2 DAYLIGHT SAV TIME (ON)
3 SET MANUAL CLOCK (OFF)
4 SET TIME ZONE
(AUTO)
TO SELECT PUSH NO. SHOWN
TO END PUSH EXIT
TIME – – : – – – –
TO END PUSH EXIT
TIME 02 :15 PM
MONTH – – /– – / – –
TO CORRECT PUSH CLEAR
TO END PUSH EXIT
• If the numbers entered do not
match the VCR’s internal calendar,
the entry will be rejected and a
question mark (?) will appear on-
screen.
• To program the VCR so its clock will
automatically move forward one
hour in April and turn back one
hour in October, see page 18.
• Enter a 0 before single digit num-
bers.
• To make corrections, press the
CLEAR button until the space for
the number you want to correct is
flashing. Then enter the correct
number.
Helpful Hints
There are four ways to set the VCR’s clock: Manually, with Time
Zone Selection, with Manual PBS Channel Selection, or with
Automatic PBS Channel Selection. Cable Box/DSS Receiver users
must set the clock manually. Before you set the clock, make sure:
• The VCR power is on.
• The VCR light appears on the display panel. If it does not, press
the VCR/TV button once.
• Channels are programmed. Details are on page 12.
• You make each entry within one minute of the previous entry.
To set the clock manually, follow the steps on this page. To use
Time Zone Selection, go to page 15. To use Manual PBS Channel
selection, go to page 16. To use Automatic PBS Channel Selection,
go to page 17.
1
Press the VCR button, then press the MENU button.
2
Press the Number 5 button to select SET CLOCK. CABLE
BOX USERS SET CLOCK MANUALLY will appear briefly.
3
Press the Number 3 button to select SET MANUAL CLOCK.
4
Press two Number buttons for the hour and two Number
buttons for the minute(s). Then press 1 for AM or 2 for
PM. For example, for 2:15 PM, press 02, 15, 2.
5
Press two Number buttons for the month, two Number
buttons for the day, and two Number buttons for the
year. For example, for July 1, 1997, press 07, 01, 97. The day of
the week will appear automatically.
6
Press the EXIT/STATUS button.
1
2
3
5
4
6