Philips VRX462AT - Manual (Page 20)

VCR Button
Press this button before pressing
VCR operation buttons.
CBL/DSS Button
Press this button before pressing
Cable Box or DSS Receiver oper-
ation buttons.
EJECT Button
Press to eject the tape.
VOL(ume) Up/Down Buttons
Press to increase or decrease the
TV’s volume.
PLAY Button
In VCR mode, press to play a
tape. Also, press to release Slow,
Still, or Search mode and to
return to normal playback. Details
are on page 56. In TV mode, press
to move up or forward one row
or selection in the TV menu if
you have a Magnavox or Philips
TV.
REW(ind) Button
When in Stop mode, press to
rewind the tape at high speed.
When in Play mode, press to
rewind the tape while the picture
stays on-screen. Details are on
page 56. Or, if you have a
Magnavox or Philips TV, press to
adjust (decrease) the picture con-
trols.
REC(ord)/OTR Button
Press once to start a recording.
Details are on page 31. Or, press
repeatedly to start a one touch
recording. Details are on page 32.
INDEX/ VAR.(iable) SLOW
Buttons
When in Stop mode, press to
search for index codes recorded
on the tape. Details are on page
48. During slow motion playback,
press to vary the playback speed.
Details are on page 56.
SLOW Button
When playing a tape recorded in
SP or SLP speed, press the SLOW
button to view the picture in
slow motion. Press again to
resume normal playback. Details
are on page 56.
20 Remote Control Buttons
...
...
POWER
CBL/DSS VCR TV
EJECT MUTE
MENU EXIT/STATUS CLEAR
VCR PLUS+
/ENTER LIGHT
F.ADV
PAUSE/STILL
1 2 3
4 5 6
7 8 9
100 0 GO-TO
MEMORY INDEX
VAR. SLOW
REMOTE LOCATOR
SKIP
VCR/TV SPEED SEARCH SLOW
TRACKING
STOP
REW FF
PLAY
VOL CHANNEL
/OTR REC
TV Button
Press this button before pressing
other TV operation buttons.
POWER Button
After pressing the CBL/DSS, VCR, or
TV button, press to turn on or off
the Cable Box/DSS Receiver, VCR,
or TV.
MUTE Button
Press to eliminate the TV’s sound.
Press again to return to the previous
volume.
CHANNEL Up/Down Buttons
After pressing the CBL/DSS, TV, or
VCR button, press to scan through
the channels of the Cable Box/DSS
Receiver, TV, or VCR.
MENU Button
Press to access the main VCR menu.
If you have a Magnavox or Philips TV,
press the TV button, then the MENU
button, to access the TV menu sys-
tem.
Number Buttons
After pressing the CBL/DSS, TV, or
VCR button, press to select a chan-
nel at the Cable Box/DSS Receiver,
TV, or VCR. Also, use to select VCR
on-screen menus or to program VCR
functions (such as setting the clock).
• Channels 1-9
To select, press 0, then the channel
you want. For example, to select
channel 7, press 0, 7.
• Channels 100 and above
To select, press the 100 button, then
the last two digits of the channel you
want. For example, to select channel
117, press the 100 button, 1, 7.
GO-TO Button
When tape playback is stopped, press
to enter the tape counter location to
which you want the tape to automat-
ically fast forward or rewind. Details
are on page 53.
SKIP SEARCH Button
Press during tape playback to skip 30
seconds of a tape. This feature will
only work with tapes recorded in SP
or SLP speed.