Philips Blu-ray Surround Base HTB3525B 2.1 CH Integrated subwoofer Bluetooth® and NFC HDMI ARC Blu-ray Disc playback - Manual (Page 35)

33
English
EN
Bluetooth
A device cannot connect with the Blu-ray
Surround Base .
• The device does not support the
compatible profiles required for the Blu-ray
Surround Base .
• You have not enabled the Bluetooth
function of the device. See the user manual
of the device on how to enable the
function.
• The device is not correctly connected.
Connect the device correctly (see 'Play
audio through Bluetooth' on page 16).
• The Blu-ray Surround Base is already
connected with another Bluetooth device.
Disconnect the connected device, then try
again.
Quality of audio play from a connected
Bluetooth device is poor.
• The Bluetooth reception is poor. Move
the device closer to the Blu-ray Surround
Base , or remove any obstacle between the
device and the Blu-ray Surround Base .
The connected Bluetooth device connects and
disconnects constantly.
• The Bluetooth reception is poor. Move
the device closer to the Blu-ray Surround
Base , or remove any obstacle between the
device and the Blu-ray Surround Base .
• Turn off Wi-Fi function on the Bluetooth
device to avoid interference.
• For some Bluetooth, the Bluetooth
connection can be deactivated
automatically to save power. This does not
indicate any malfunction of the Blu-ray
Surround Base .
Network
Wireless network distorted or not found.
• Make sure that the wireless network is
not disturbed by microwave ovens, DECT
phones, or other neighboring Wi-Fi devices.
• Place the wireless router and the home
theater within five meters of each other.
• If the wireless network does not work
properly, try a wired network installation
(see 'Set up the wireless network' on page
13).
Slow video streaming from Netflix and VUDU.
• Look in your wireless router’s user manual
for information on indoor range, transfer
rate, and other factors of signal quality.
• You need a high speed Internet connection
for your router.
Netflix and VUDU does not work.
• Make sure that the network is correctly
connected and set up (see 'Connect and
set up a home network' on page 12).
• Check the router connection (refer to the
user manual for the router).